Manuales relacionados para BRKT Brand TLT3780S
Resumen de contenidos para BRKT Brand TLT3780S
- Página 1 TLT3780S Low Profile Fixed Flat Panel Mount Large Fixed Mount Max Screen Size: 80” Max Weight: 150lbs...
-
Página 2: Tools Needed
DISCLAIMER – WARNING INFORMATION Disclaimer – BRKT BRAND has extended every effort to ensure to accuracy and completeness of this manual. However, BRKT BRAND does not claim that the information covers all installation and or operational variables. The information contained in this document is subject to change without notice or obligation of any kind. Regarding the information contained herein, BRKT BRAND makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy, sufficiency, or comple teness of the information contained in this document. - Página 3 HARDWARE PART NUMBERS M4 x 12 M5 x 12 M6 x 15 M8 x 15 M4 x 25 M5 x 25 M6 x 25 M8 x 25 SQUARE WASHER SPACER Lag Bolts PRODUCT COMPONENT PARTS Universal Adapter Range (W x H) Minimum: 100mm x 100mm (Medium and Large) Maximum: 400mm x 400mm (Medium) Maximum: 600mm x 400mm (Large)
- Página 4 STEP 1- FLAT BACK FLAT PANEL Connect vertical rail to flat panel Conecte el adaptador al monitor Connectez l'adaptateur au moniteur STEP 1- CURVED BACK FLAT PANEL Connect vertical rail to flat panel Conecte el adaptador al monitor Connectez l'adaptateur au moniteur Spacers can also be used to provide clearance for cables and connectors...
- Página 5 STEP 2A- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO 2B) Find stud and mark edge and center locations Ubique el panel y marque las ubicaciones de los bordes y el centro. Repérez l'emplacement d'une poutre, puis marquez l'emplacement des bords et du centre de cette poutre. LEVEL WALL PLATE WITH DRILL BIT INCLUDED BUBBLE LEVEL...
- Página 6 STEP 2A - WOOD STUD INSTALLATION CONTINUED Drill pilot hole Wood Stud Realice el agujero piloto Panel de madera Percez le trou de guidage Poutre de bois DRILL BIT NOT INCLUDED STEP 2A - WOOD STUD INSTALLATION CONTINUED Mount wall plate Coloque la placa de pared Montez la plaque murale...
- Página 7 STEP 2B – SOLID CONCRETE INSTALLATION Use wall plate to mark mounting locations/ drill pilot holes Use la placa de pared para marcar el lugar donde se realizará la instalación Utilisez la plaque murale pour marquer l'emplacement de montage Solid Concete Drill pilot hole Realice el agujero piloto Concreto sólido...
- Página 8 STEP 2 – SOLID CONCRETE CONTINUED Mount wall plate Coloque la placa de pared Montez la plaque murale...
-
Página 9: Locking Mechanism
STEP 3 Hang vertical rails with monitor attached Cuelgue con el monitor adherido. Accrochez avec le moniteur installé. 2 vertical height mounting positions Heavy, Assistance Required TRES LOURD ! Cette etape requiert deux personnes !PESADO! Necesitara ayuda para realizar esta operacion STEP 4 Locking mechanism Mecanismo de fijación... -
Página 10: Warranty Information
BRAND. To the maximum extent permitted by law, BRKT BRAND disclaims any other warranties, expressed or implied, including warranties of fitness for a particular purpose and warranties of merchantability. BRKT BRAND will not be liable for any damages arising out of the use of, or inability to use, BRKT BRAND products.