Radio Operation - NGS Technology Box Manual De Usuario

Radio Operation

TO PLAY THE RADIO
1. Adjust the FUNCTION control to the RADIO posi-
tion, the POWER Indicator will light up.
2. Select the desired band with the BAND switch.
3. Tune to the desired station by rotating the
TUNING control (Move the control back and forth
until you get the strongest clearest sound).
4. The built-in AM antenna and external FM
TELESCOPIC ANTENNA are directional.
∙ When receiving an FM broadcast, fully extend
the TELESCOPIC ANTENNA and position for the
best reception.
∙ For AM broadcasts, rotate the whole set until
the best reception is heard.
5. Adjust the volume level to a comfortable listen-
ing level.
6. To turn off the radio, adjust the FUNCTION
control to OFF position.
DVB-T Operations (only Box TV model)
CONNECTING THE AERIAL
TO THE PLAYER
12
NOTES:
∙ If a particular FM (STEREO) station is weak, or you hear
too much background noise, try moving the position of
the band selector switch to the FM (MONO) position. This
can often result in a much clearer reception.
∙ When the band selector switch is set to FM STEREO
and a stereo broadcast is being received, the FM STEREO
indicator on the top of the unit will be lit.
STEREO HEADPHONE JACK
A stereo phones jack has been provided on the back
of the unit so that you can listen to the unit without
disturbing others. To use this jack, plug in the head-
phones/earphones (not included) and adjust the
VOLUME control to a comfortable listening level.
NOTE: When external headphones/earphones are
connected, the sound to the unit's main speakers will
be muted.Caution: Excessive sound pressure from ear-
phones and headphones can cause hearing loss.
GETTING STARTED
∙ Be sure the TV antenna is connected to your
player properly;
∙ Power on the player and adjust the FUNCTION
control on the main unit to DVD/DVB position,
then press DVD/DVB button to select DVB play
mode.
A dialogue of first time installation shows on the
screen, select YES option to perform the first time
installation, then select the options as mentioned
in the dialogue to finish the first time installation,
select NO option to exit this interface.
LANGUAGE
Press AUDIO button on the remote to change differ-
ent Ianguage supplied by TV programs in DVB mode.
TELETEXT
Press TEXT button on the remote to display
some incident letter information in TV programs
(subtitle,weather forecast, Advertisement informa-
tion, etc) in DVB mode.