Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTRUCTION MANUAL
quantum PAR meter
Measures photosynthetically active
radiation (PAR) from 400 to 700 nm
The Quantum Par Meter is designed to measure PAR (Photosynthetically Active
Radiation) flux in wavelengths ranging from 400 to 700 nm. There is a proportional
relationship between the number of photons absorbed in 400 to 700 nm band and
the rate of photosynthesis in plants, which is important for horticultural studies
and monitoring plant physiology. This compact, fully portable handheld light meter
measures up to 10,000 in units of micro-mol per meter squared per second (umol/
m2/s) which is also called Photosynthetic Photon Flux Density (PPFD).
Publicidad
Resumen de contenidos para Hydrofarm quantum PAR meter
- Página 1 Measures photosynthetically active radiation (PAR) from 400 to 700 nm The Quantum Par Meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700 nm. There is a proportional relationship between the number of photons absorbed in 400 to 700 nm band and the rate of photosynthesis in plants, which is important for horticultural studies and monitoring plant physiology.
- Página 2 Measurements. Press HOLD when hydrofarm.com and uncompress the you want to take a measurement. The QuantumParMeter folder. Quantum PAR meter can store up to 1. Before the installation process, 99 manual measurements. connect the Quantum PAR Meter to 4. reset Meter: From LOG or sMPL your computer by a USB cable, and mode, press the MODe button.
- Página 3 If you have a desktop shortcut, click the shortcut Quantumlightmeter directly or click ‘Start’ ->All Programs-> Quantumlightmeter. 1. If the Quantum Par Meter was not connected to your computer, the following dialog should appear: The square button becomes reD and you will get the following message: “Meter not detected –...
- Página 4 WarninG: During the Data transmission process, the Quantum Par Meter must be powered on. When the device and your computer are connected, please do not unplug the device. Close the software first and then the device can be unplugged. www.hydrofarm.com...
-
Página 5: Medidor De Rfa Quantum: Inicio
INSTRUCCIONES medidor de RFA quantum Mide la radiación fotosintéticamente activa (RFA) desde 400 a 700 nm El medidor de RFA Quantum está diseñado para medir el flujo RFA (Radiación Fotosintéticamente Activa) en longitudes de onda que oscilan entre 400 y 700 nm. Existe una relación proporcional entre el número de fotones absorbidos en la gama de 400 a 700 nm y la tasa de fotosíntesis en las plantas, que es importante para los estudios hortícolas y el control de la fisiología de la planta. -
Página 6: Directrices Para La Instalación Del Controlador
Puede descargar 4. Hasta ahora, puede guardar o mostrar los QuantumParMeter en www.hydrofarm.com y datos guardados en el ordenador. descomprimir la carpeta QuantumParMeter. 5. Si hace clic en Display (Mostrar), por 1. - Página 7 Appuyez sur HOLD (Mesurer) pour contrôleur. Vous pouvez télécharger QuantumParMeter réaliser une mesure. Le mesureur RPA Quantum sur www.hydrofarm.com et décompresser le dossier peut enregistrer jusqu’à 99 mesures manuelles. QuantumParMeter. 4. rétablir le mesureur : à partir du mode LOG ou 1.
- Página 8 »). débrancher simplement le dispositif mais il convient de fermer tout d’abord le logiciel puis de débrancher le dispositif. 4. Vous pouvez alors conserver ou afficher les données enregistrées sur l’ordinateur. www.hydrofarm.com...