Nuisance Prevention Circuitry (Npc) - Directed Electronics Viper 3100 Guia Del Propietario

Zone # (led flashes)
1
2
3
5
Note: The Warn-away trigger does not report on the LED.

Nuisance Prevention Circuitry (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,
bypasses them until corrected. If a point of entry (trunk, hood, door)
is left open following a forced entry, it is bypassed. It becomes active
again only after being closed.
Bypassed sensors automatically reset after one hour, and after the
vehicle is driven. Disarming then re-arming the alarm does not reset
bypassed sensors.
8
Table of Zones
Zone Name
Trunk/Sensor 2
Shock Sensor
Door
Ignition
© 2011 Directed Electronics. All rights reserved.