GEA JX7227 Instrucciones De Instalación

Installation
Instructions
Questions?
Call GE Answer Center at 800.626.2000 or
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
instructions for local inspector's use.
IMPORTANT –
governing codes and ordinances.
Note to Installer –
instructions with the Consumer.
Note to Consumer –
future reference.
For easier installation and personal safety, we recommend
that two people install this microwave oven.
Unplug the microwave oven before attempting
installation of this kit.
FOR YOUR SAFETY:
WARNING –
installation, switch power off at service panel and lock
the service disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.
TOOLS YOU WILL NEED
#2 Phillips
screwdriver
Pencil
Awl or punch
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
Save these
Observe all
Be sure to leave these
Keep these instructions for
Before beginning the
Drill with " bit or #35
7 64
Scissors (optional) Tape measure
.
Built-In Trim Kits
JX7227 and JX7230
Visit our Website at:
Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
Completion time – 1-3 hours
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
This kit is UL listed for installation alone or over
any General Electric/Hotpoint single electric wall oven.
PARTS INCLUDED
PART
Trim Frame
Bottom Duct
Top Bracket
Phillips Round-Head
Screws
Phillips Flat-Head
Screws
Anti-Tip Bracket
Bottom Bracket
Template
1
www.GEAppliances.com
QUANTITY
24
(21 or 22 required
for installation)
(4 required
for installation)
1
1
1
5
1
1
1