Radius Design WALL FLAME Manual página 7

ENGLISH
the flame height can be adjusted using the
hook supplied to move the slides. ensure that
the flames do not become too high. the hole
with the label "off" closes the flaps; the hole
with the label "on" opens the flaps. please
position the flaps so that the label "off" is
pointing inwards. extinguish the flames by
using the slides to close the combustion
opening. wait approx. 30 sec and make sure
13
that the flames are completely extinguished.
if the extinguisher slide jams, apply a little
copper paste to the short edges of the extin-
guisher slide.
7
stand 15.12.09