Technical Data; Installation - Electrolux EWF 127410 X Manual De Instrucciones

Ocultar thumbs Ver también para EWF 127410 X:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
The machine makes an un-
usual noise:
No water is visible in the
drum:
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.

TECHNICAL DATA

Dimensions
Electrical connection
Water supply pressure
Level of protection against ingress of solid particles and moisture
1)
Water supply
Maximum Load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
Possible cause/Solution
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor en-
sures a softer start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of the machine.
Machines based on modern technology operate very economically
using very little water without affecting performance.
Width / Height / Depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
Cotton
Maximum
1. After removing all the packaging, care-
60 / 85 / 60 mm
220-230 V
2200 W
10 A
50 Hz
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
IPX4
Cold water
7 kg
1200 rpm
fully lay machine on it's back to remove
the polystyrene base from the bottom.
electrolux 23
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido