Polarized Plug ; Using Your Iron - West Bend SOHO Manual De Instrucciones

SAVE THESE INSTRUCTIONS
POLARIZED PLUG – This appliance may have a polarized plug –one blade is wider
than the other. To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
1. Never pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect the appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the cord for damage. If damage is found, do not use
the appliance.
5. Let the iron cool completely before wrapping the cord. Never wrap the cord
tightly around the appliance as this could place undue stress on the cord where
it enters the appliance and cause it to fray and break.
DO NOT OPERATE THE APPLIANCE IF THE CORD SHOWS ANY DAMAGE, IF
THE APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
SPECIAL ATTENTION: This appliance is designed with a protective coating around
the heating elements. When plugged in and operating for the first time, there may be
momentary smoking while this coating is initially heated. This presents no danger to
the user and does not indicate a defect in the unit. When using for the first time,
allow the appliance to continue heating until the smoke dissipates.
Shot of Steam
Button
Spray Button
Steam Control
Dial
Water Tank Inlet
Sprayer
U Y
SING OUR
3
I
RON
Power
Indicator
Temperature
Dial
Heel Rest
Cord Wrap
Water Tank
Max Fill
Marking
Non-Stick
Soleplate