Flex FX0111 Manual Del Operador página 9

TO CHARGE THE BATTERY PACK (FIG. 2)
NOTICE: This lithium-ion battery pack is
shipped partially charged. Before using it for the
first time, fully charge the battery pack.
a. Always charge the battery pack with the
correct charger.
b. Connect the charger to a power supply.
c. Attach the battery pack to the charger by
aligning the raised ribs of the battery pack
with the slot in the charger. Slide the battery
pack onto the charger.
d. When the charger indicates that the battery
pack is fully charged, remove it from the
charger.
Please refer to the charger manual for detailed
charging instructions.
NOTICE: If the battery pack cannot accept a
charge, the contacts of the charger or battery
pack may be contaminated. Clean the contacts
of the charger or battery pack (e.g., by inserting
and removing the battery several times or
scrubbing with a cotton swab and alcohol), or
replace the battery pack, as required.
Fig. 2
-9-