Publicidad
Idiomas disponibles
Idiomas disponibles
1. Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.
MAKE SURE YOU DO NOT DISCARD THE HARDWARE.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• When installing or removing the electric insert, move from the back of the fi replace so as not to
scratch the hearth/base.
• Use care in assembling your new fi replace, take your time and use the hardware provided and a
quality Phillips head screwdriver.
• Do not sit on any part of the mantel.
Please read all "Electric Fireplace Insert"
instructions prior to installing and
removing Electric Insert in your completed
Fireplace Mantel.
CAUTION: unplug insert from power
supply before moving.
TO REMOVE INSERT
1. Unscrew screws from metal brackets
holding insert onto mantels inside front
panels.
2. Carefully lift and pull insert out from the
back. Do not drag insert across Hearth/Base
as it may scratch your unit.
E-2
GETTING STARTED
CAUTION:
HELPFUL HINTS
CAUTION: do not plug insert into
power supply until the insert has been
completely installed and mantel moved
into its fi nal location.
TO INSTALL NEW INSERT
1. Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across Hearth/Base as it may scratch your unit.
2. Install the mounting brackets to hold insert fl ush
against the inside of the mantel.
Move your completed unit only short distances.
Move completed unit with great care.
V2.0
Publicidad
