EGAmaster 57535 Manual De Instrucciones página 5

1. When not in use, store it in the provided case.
2. With the exception of the ratchet mechanism, do not lubricate the wrench. The ratchet
mechanism may be lubricated as needed with a few drops of light machine oil.
3. Do not use acetone or other solvents to clean the wrench, use window cleaner or denatured
alcohol applied with a clean cloth instead.
4. With the exception of the ratchet mechanism, there are no user-serviceable parts. Do not
disassemble the torque wrench for any reason. When service is needed, send the wrench to the
nearest factory-authorized service center.
This torque wrench is certified to have been calibrated prior to shipment to the accuracy of +/-
4% in the clockwise direction .
The wrench should be re-calibrated periodically. The calibration of the wrench should be
checked at least once a year, after any abnormal use or overloading, or after 5.000 cycles.
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the Testing Pump
being incorrectly used or, applied for a purpose for which it was not intended.
The maker guarantees to the machine owner garantie ilimitee against any manifacture defect.
This guaranteee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly filled
within one week after purchased the machine to the maker.
MAINTANANCE
CERTIFICATION
CALIBRATION
NOTES
GUARANTEE
5