Clarity CI000 Guía Del Usario página 9

Warning: To prevent electrical shock, always unplug the telephone line cord
from the wall before removing the cord from the telephone. Never leave the cord
connected to the wall if it is not also connected to the telephone.
• Hold the Clarity telephone so that the holes on the mounting bracket line up
with the raised mounting pins on the modular wall jack. Once the holes are
lined up, push the phone in towards the wall jack and then slide the phone
downward until it is securely seated on the wall jack.
• Plug one end of the handset cord (coiled) into the bottom of the handset.
• Plug the other end of the handset cord into the jack located on the lower left
edge of the Clarity telephone.
• Place the handset in the cradle of the Clarity telephone. The special tabs will
hold it in place.
INSTALLATION
Hook switch
Tabs
signal
Desk
Mount
key
Wall
Mount
Key
Wall-Mount Bracket
turned so phone can
be wall-mounted.
Modular
wall jack
9