RugDoctor Pro MGH-1 Manual Del Usuario página 7

How to use:
CLEANING YOUR GROUT
1
Plug in the Machine
Insert plug into a properly
grounded outlet.
CAUTION
Before plugging machine
in check the Power
Button to make sure it is
in the "off" position.
3
Position the
Grout Tool
Position the Grout Tool in
front of the area that you
want to deep clean.
Use the grout guides
marked on the back of the
Grout Tool Head to ensure
that the tool is lined up
with the grout line.
5
Keep Power On
for 15 Seconds
Keep the machine in
"Tool" mode 15 seconds
after cleaning, to allow for
all of the dirty solution to
be collected into the Dirty
Water Tank.
r u g d o c t o r . c o m | 1 - 8 0 0 - 7 8 4 - 3 6 2 8
4
Cleaning Your Grout
Press the Trigger on the Handle/
Hose to apply solution while making
2 slow wet passes (1 forward and 1
back) over each area.
Release the Trigger
Make 2 slow dry passes (1 forward
and 1 back) to suck up the dirty
solution (do not hold down the
Trigger for this step)
Repeat as necessary.
15
seconds
2
Turn On the Machine
Press the Power Button located on
the Main Handle to "Tool" mode.
The Tool Brush will spin as whenever
the machine is in "Tool" mode.
6
Turn Off the Machine
Press the Power Button
located on the Main Handle
to "Off" position.
TRIGGER
7
Part #12253