Honeywell HS-120 Serie Manual Del Propietário página 2

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic
precautions should
always be followed
to reduce the risk of fire,
electric shock, and injury
to persons, including
the following:
1. Use this fan only
as described in this
manual. Other use not
recommended may
cause fire, electric shock
or injury to persons.
2. This product is
intended for household
use ONLY and not for
commercial, industrial or
outdoor use.
3. To protect against
electric shock, do not
place fan in window,
immerse unit, plug or
cord in water or spray
with liquids.
4. This appliance has a
polarized plug (one blade
is wider than the other).
To reduce the risk of
shock, this plug is
intended to fit only one
way in a polarized outlet.
If the plug does not fit
INSTRUCTIONS F0R USE AND CARE
fully in the outlet, reverse
the plug. If it still does not
fit, contact a qualified
electrician. DO NOT
attempt to defeat this
safety feature.
5. Close supervision is
necessary when any
appliance is used by or
near children.
6. Turn the fan to the OFF
position and unplug
the fan from the outlet
when not in use, when
moving the fan from one
location to another and
before cleaning.
7. To disconnect the fan,
grip the plug and pull it
from the wall outlet.
Never pull by the cord.
8. Do not operate the
fan in the presence
of explosive and/or
flammable fumes.
9. Do not place the fan
or any parts near an
open flame, cooking or
other heating appliance.
10. Do not operate the
fan with a damaged
cord or plug, if the
product malfunctions
or is dropped or
damaged in any manner.
(see warranty)
11. Avoid contact with
moving fan parts.
12. The use of
attachments not
recommended by
the manufacturer may
be hazardous.
13. Place the fan on a dry
level surface.
14. Do not hang or mount
fan on a wall or ceiling.
15. Do not operate if the
fan housing is removed
or damaged.
16. A loose fit between
the AC outlet (receptacle)
and plug may cause
overheating and a
distortion of the plug.
Contact a qualified
electrician to replace
loose or worn outlet.
WARNING: To Reduce
The Risk of Fire or
Electric Shock, Do Not
Use This Fan With Any
Solid-State Speed
Control Device.