Dockin D CUBE Manual Del Usuario página 3

4
AUX input
USB C charging input
(DC IN 5V 2.0A)
TURNING ON
Press the button on the top side of your D CUBE and hold for 3
seconds. It will automatically connect with the last Bluetooth device
(blue LED stays lit) or changes into pairing mode (blue LED flashes
rapidly).
PAIRING
Bluetooth:
1. Activate Bluetooth on your device (Bluetooth settings).
2. Go to your Bluetooth settings and scan for discoverable devices.
3. Select "DOCKIN D CUBE" from the Bluetooth device list.
4. After successful pairing the blue LED on the D CUBE stays lit
and you will hear a confirmation sound.
NFC:
This function is only available if your device supports NFC.
1. Activate Bluetooth on your device (Bluetooth settings).
2. Activate NFC on your device.
3. Hold your device close to the top of the speaker (first time con-
nection via NFC needs to be confirmed on your device).
4. After successful NFC pairing the blue LED on the D CUBE stays
lit and you will hear a confirmation sound.
To select a new device while still paired the current Bluetooth
connection needs to be disengaged. This can be achieved by
disconnecting your device in its Bluetooth settings or by pressing
and holding the multifunction button on your D CUBE.
5