AirLive WT-2000USB Guía De Instalación Rápida página 5

Important Information
The following installation operates under Windows XP. Procedures are similar for Windows
98SE/Me/2000/2003 Server.
Please do not install the adaptor into your computer before installing the software program from the CD.
Install the Driver and Utility
1. Insert the Installation CD to your CD-ROM Drive. Click
"Utility" and will execute the "setup" program.
2. Click "Yes" to process the installation if you accept the
license agreement.
3. In Windows XP, there is a "Windows Zero Configuration
Tool" for you to setup the wireless adaptor. You can
choose to configure the adaptor through the Windows Zero
Configuration Tool or the AirLive Turbo-G Configuration
Tool for the adaptor. It is recommended to choose the
AirLive Turbo-G Configuration Tool for the adaptor. Click
"Next" to continue.
4. If you need the adaptor to operate with better performance,
please choose the "Optimize for performance" to enable
the Tx Burst mode. Or you can choose "Optimize for Wi-Fi
mode" to let the adaptor run in standard wireless network.
WT-2000USB
English
3