Customer Services - BOULANGER Homelight Manual De Uso

No pulses are released when you press the trigger button
• Make sure that the application surface of Homelight® is fully in
contact with the skin and the ON/OFF/READY LED indicator is
flashing.
• Make sure that the ON/OFF/READY LED indicator is on.
> If the ON/OFF/READY LED indicator is still off after 10
seconds, switch Homelight® off and on again by pressing
the ON/OFF button twice.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF LED READY indicator is glowing red and flashing
> Switch Homelight® off. Homelight® goes into safety
mode because it has detected overheating or a critical
problem (broken fan, problem with the capacitor, etc.). Let
Homelight® cool down for 15 minutes before turning it on
again.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF/READY LED indicator flashes alternately green and red.
> The adapter used to connect your Homelight® device to
the power socket is not the one supplied or it is broken.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF/READY LED indicator is at red.
> The device is now at the end of its service life.

6.2. Customer Services

For further information about Homelight® products, please visit www.
babyliss.com.
If Homelight® is broken, damaged, needs to be repaired or if you need
any kind of assistance, please contact BaByliss Customer Services.
56