Volume Mode; Error Indication - Kalorik USK EKS 39724 Manual De Instrucciones

Fax +1 305 430 9692

VOLUME MODE

This measuring cup scale can convert the weight of the
most common ingredients automatically into volume
measurements (ml; Fl. Oz. or US cups).
For example, to measure milk in US cups, proceed as
follows:
Press
"On/Zero"
Press
MODE
Press UNIT
Add Liquid

ERROR INDICATION

If the display shows symbols randomly or if the scale doesn't turn off
automatically, it means that your scale has a problem (wrong initialization
or weighing error). Remove any object from the scale and wait for it to turn
off. Make sure the steel bowl is well in place (if used). Then start again.
If the problem goes on, remove the batteries for 10 seconds, and then put
them back in place.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
Place the scale on a flat surface, with a
•
container such as the stainless steel bowl
supplied.
Press On/Zero button to turn on the scale.
•
Wait until "0" is displayed.
•
Set the weighing system to metric or imperial
•
using the UNIT button (if needed).
Press the MODE button to select Water, Milk, Oil
•
or Flour – an indication arrow shall appear in in
front of the ingredient selected.
Press the UNIT button to display the volume in US
•
Cups.
The display shows now the volume of the
•
ingredient selected, in US cups.
Add the ingredient to measure.
•
By pressing UNIT again, you can switch back to
•
ml or Fl. Oz., depending on the weighing system
initially selected.
7
Assembly page 7/28
special instruction from Team
Print only
EKS 39724 - 120501