Kalorik EKS 42428 Manual Del Usario página 5

USE
Put the scale on an even and hard surface, for instance a table or
countertop. Avoid soft surfaces.
Weighing
1. Switch scale on using the "On/Tare" switch situated on the glass
platform. The LCD screen will initialize.
2. The scale will turn on and the LCD display will show "0 g" or "0:0.0
lb:oz." . Change the weight unit as needed, by pressing the "Unit"
touch button.
3. Put the object you want to weigh on the glass plate. The stabilized
weight is displayed.
4. Remove the object from the platform.
5. The scale turns off automatically after 60 seconds. You can also
switch the scale off anytime by keeping pressing on the "On/Tare"
button for 2 seconds.
6. If scale goes off automatically, press on the "ON/TARE" touch
button to switch on again.
Tare function (auto-zero)
The zero/tare function is extremely useful to calculate the weight of
ingredients that cannot be put directly on the platform. For example,
flour, or liquids, which require a container before weighing.
In order to use this function, place the empty container or object on
the scale, and then press the "On/Tare" touch button near the LCD
display. The scale will switch on and indicate 0g or 0:0.0 lb:oz.
www.KALORIK.com
5
EKS 42428 - 180330