Declaration Of Conformity; Technical Specifications - AERMEC VCF45C Manual Instalación

DESCRIPTION
VCF45C / VCF47C are kits made up of an insulated 3-way valve with 4
connections, an electrothermal actuator and related fittings. They are
suitable for installation on VED-VED_I fan coils with both right and left
connections.These are three-way valves and 4 all or nothing type con-
nections, normally closed, with by-pass flow control fitted as a mixer
with G 3/4" Male flat fittings, powered at 230V ~50Hz The valves can be
controlled by the control panels (accessory) which are enabled for the
valve checking function. Consult the control panel characteristics before
selecting a panel. The VCF45C / VCF47C kits must be installed on the
main coil and are compatible with VED-VED_I sizes:
VCF45C: VED430, VED432, VED440, VED441, VED530, VED532,
VED540, VED541
VED530I, VED532I, VED540I, VED541I
VCF47C: VED630, VED632, VED640, VED641, VED730, VED732,
VED740, VED741
VED730I, VED732I, VED740I, VED741I
VCF45H / VCF47H are kits made up of a three-way valve with 4 con-
nections, an electrothermal actuator and related fittings. They are suit-
able for installation on VED-VED_I fan coils with both right and left
connections. These are three-way valves and 4 all or nothing type con-
nections, normally closed, with by-pass flow control fitted as a mixer
with G 3/4 "Male flat fittings, powered at 230V ~50Hz.The valves can
be controlled by the control panels (accessory) which are enabled for the
valve checking function. Consult the control panel characteristics before
selecting a panel. The VCF45H / VCF47H kits must be installed on the
secondary heating only coil and are compatible with VED-VED_I sizes:
VCF45H:VED432, VED441, VED532, VED541
VED532I, VED541I,
VCF47H:VED632, VED641, VED732, VED741
VED732I, VED741I
VCF45C/ VCF47C KIT COMPONENTS:
• 1 three-way valve and 4 connections
• 1 Electrothermal actuator
• 3 Connection pipes
• 3 Flat seals
• 2 O-Ring seals
• 1 Insulating shell
• 4 Self-locking clamps
• 1 Probe holder clip
VCF45H/ VCF47H KIT COMPONENTS:
• 1 three-way valve and 4 connections
• 1 Electrothermal actuator
• 3 Connection pipes
• 2 O-Ring seals
• 3 Flat seals
• 2 Self-locking clamps
• 1 Probe holder clip

DECLARATION OF CONFORMITY

See the Declaration of Conformity of the VED-VED_I unit

TECHNICAL SPECIFICATIONS

Power supply:
Initial peak current:
Input operating power:
Water temperature range:
Usable liquids:
Initial opening time:
Final opening time:
Maximum working pressure applied
to the fan coils:
Environmental operating conditions
Temperature:
Environmental storage conditions
Temperature:
Protection level
of the electrothermal actuator:
6
AVCF4547UJ _ 1106 - 4413950_01
Protection class
of the electrothermal actuator:
Electrothermal actuator with threaded ring nut: M30 x 1.5
Power cable:
Model
Valve body
Connectors
Seal
Connection pipes
Valve side
Coil inlet connections
Seal
Unit side
Connectors
Seal
Pressure drop
Kvs AB-A
open. With the electrothermal actuator powered, the actuator indicator
is red.
A-AB way of the valve is open, while the by-pass way (B-AB) is closed.
230V (±10%) ~ 50Hz
With the electrothermal actuator powered, the actuator indicator is
black.
0.25A x 0.5s
2.5W
4°C ÷ 80°C
water (with glycol ≤ 50%)
90s
180s
800kPa
0°C ÷ 40°C
-25°C ÷ 60°C
IP44
VCF47C / VCF47H
VCF45C / VCF45C
VCF45C / VCF47C VCF45H / VCF47H
G 3/4" male
G 3/4" Female G 3/4" Female
G 3/4" male
O-Ring
B - AB (By-pass)
CALCULATION OF THE PRESSURE DROP
( (
2
10 q
∆p [kPa] = Pressure drop
Dp =
q [m
Kvs
VALVE ASSEMBLY DIAGRAM (MIXER)
A
B
AB
OUT
A-AB way of the valve is closed, while the by-pass way (B-AB) is
SYSTEM EXAMPLE
2-PIPE SYSTEM
SW
MAIN
COIL VCF45C
VCF47C
With water sensor in the coil
Type II
L=2200mm 2 x 0.75mm
L=2000mm 2 x 0.75mm
G 3/4" male
Flat Flat
Flat Flat
G 1/2" male
O-Ring
4 4
1.7 1.7
3
/h] = Water flow rate
IN
MAIN
MAIN
VCF45C
COIL
COIL
VCF47C
With water sensor upstream of the valve
2
2
V
V
SW