Operation - Troy-Bilt 26J Mini-Rider Manual Del Operador

Tractor de césped
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

WARNING
Avoid Serious Injury or Death
Know location and function of all controls.
Remove objects which could be thrown by the blades.
Go up and down slopes, not across.
Use extra caution on slopes. Do not mow slopes greater
than 12 degrees. Avoid sudden turns. Use low speed.
Do not operate machine where it could tip or slip.
If machine stops going uphill, stop blades and back down
slowly.
Before leaving operator's position, disengage blades,
engage parking brake, shut off and remove key.
Be sure blades and engine are stopped before placing
hands or feet near blades.
Keep safety devices (guards, shields, switches, etc.) in
place and working.
Keep bystanders away.
Allow machine to cool before fueling or storing.
Keep machine free of debris.
Read Operator's Manual
Safety Interlock Switches
This tractor is equipped with a safety interlock system for the
protection of the operator. If the interlock system should ever
malfunction, do not operate the tractor. Contact an authorized
service dealer.
The safety interlock system prevents the engine from
cranking or starting unless the parking brake is engaged,
and the PTO (Blade Engage) lever is in the disengaged (OFF)
position.
The engine will automatically shut off if the operator leaves
the seat before engaging the parking brake.
The engine will automatically shut off if the operator leaves
the tractor's seat with the PTO (Blade Engage) lever in the
engaged (ON) position, regardless of whether the parking
brake is engaged.
With the ignition key in the NORMAL MOWING position,
the PTO (Blade Engage) clutch will automatically shut off
if the PTO (Blade Engage) lever is moved into the engaged
(ON) position with the shift lever in position for reverse
travel.
The engine will automatically shut off if the mulch plug,
deck chute or bagger chute is removed, regardless of
whether the parking brake is engaged or the PTO (Blade
Engage) lever is in the disengaged (OFF) position.
WARNING!
interlock system is malfunctioning. This system was
designed for your safety and protection.
18
Do not operate the tractor if the
Engaging the Parking Brake
To engage the parking brake:
1.
Fully depress the clutch-brake pedal and hold it down with
your foot.
2.
Move the parking brake lever down into the parking brake
position.
3.
Release the clutch-brake pedal to allow the parking brake
to engage.
To release the parking brake:
1.
Depress the clutch-brake pedal and move the parking
brake lever out of the parking brake position.
Setting the Cutting Height
1.
Select the height position of the cutting deck by placing
the deck lift lever in any of the different cutting height
notches on the right side of the fender.
WARNING!
Keep hands and feet away from the
discharge opening of the cutting deck.
Refer to Leveling the Deck in the Maintenance & Adjustments
section of this manual for more detailed instructions regarding
deck adjustment.
Starting the Engine
WARNING!
Do not operate the tractor if the
interlock system is malfunctioning. This system was
designed for your safety and protection.
NOTE: Refer to the Assembly & Set-Up section of this manual for
gasoline and oil fill-up instructions.
1.
Insert the tractor key into the ignition switch module.
2.
Place the PTO (Blade Engage) lever in the disengaged (OFF)
position.
3.
Engage the tractor's parking brake.
4.
Activate the choke control by moving the throttle/choke
control all the way forward into the choke position.
5.
Turn the ignition key clockwise to the START position.
After the engine starts, release the key. It will return to the
NORMAL MOWING position.
CAUTION:
Do NOT hold the key in the START
position for longer than ten seconds at a time. Doing
so may cause damage to your engine's electric
starter.
6.
After the engine starts, deactivate the choke control by
placing the throttle control into the FAST position.
NOTE: Do NOT operate this unit with the Choke control
activated. Doing so will result in a "rich" fuel mixture and can
cause the engine to run poorly.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido