Pin Method - Ovislink EVO-W301USB Manual Del Usuario

3. Then wait a minute until Figure 5 appears. Click Finish to
complete the WPS configuration.
II. PIN method
There are two ways to configure the WPS by PIN method:
A. Enter a PIN into your AP device.
B. Enter the PIN from your AP device.
Following are the detailed configuration procedure of each way.
A. Enter a PIN into your AP device
1. Double click the icon on the desktop to open the WPS Utility
and then you can see the welcome screen shown as Figure
3 Click Next to continue. Figure 6 will appear. Select the
second option, and you will see the PIN value of the adapter
which is randomly generated. Click Next.
2. Open the Router's Web-based Utility and click
WPS link on the left of the main menu. Then Figure
1 will appear. Click Add device, then you can see
Figure 6 Select Enter the new device's PIN and
enter the PIN value of the adapter shown in
Figure 7, click Connect.
3. When Figure 7 appears, the WPS configuration is complete.
B. Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 6. Click Next to continue. Then Figure
8 will appear. Select the third option and enter the PIN value
which is labeled on the bottom of the Router. Click Next.
2. When Figure 5 appears, the WPS configuration is complete.
Note: If you generate a new PIN code for your Router, please
enter the new one instead.
8
Figure 5
Figure 6
Figure 8
Figure 7