Tabla de contenido
Publicidad
OPERATION MANUAL
Product Description
This is the control unit of the WC-6 system. It provides comprehensive and foolproof
control over this sophisticated system. When this control unit has establish configuration
with the Color Architect units and driver unit, you can achieve desired lighting effects by
simple touch of subtle buttons on the control unit.
Technical Specifications
Power Requirement............................................................................. DC 12V(fed by the driver unit)
Programs .......................................................... 8 programmable programs & 8 permanent programs
Control Signal ......................................................................................................... DMX-512 Protocol
Accessory(included) .......................................................................... 10-meter long 4-way flat cable
Dimensions..................................................................................................... Approx. 130x90x90mm
Weight............................................................................................................................ Approx. 0.4Kg
Set colors manually
This system has factory default settings of scenes: Scene 1(press Scene, then CH 1)sets
all channels to white, Scene 2(press Scene, then CH 2) sets all channels to the next color
(Amber), Scene 3 access Green, and so on.
You can also set desired color to the selected channel. Tap CHANNEL, then either of CH
1-8 to select the channel you want, its LED is lit indicating your selection. Tap COLOR,
then either of CH 1-8 to set a color to the channel you have selected, its LED is lit indicating
he color.
At the stage of being, CH 1-7 refer to a sequence of colors: white, amber, green, pink, blue, cyan
and orange, CH 8 leads to a slow change through all the colors.
Appendix - DMX output values:
0 = White
43 = Amber
75 = Green
108 = Pink
140 = Blue
173 = Cyan
205 = Orange
253 = Slowscroll
Set all the fixtures to white
If you want to set all the fixtures to white, just press the White button.
WC6 CONTROLLER
24-004-1138
Rev1.0
Apendice: Configuración del Sistema
Hasta 4 lámparas pueden ser conectadas en cada canal, con lo cual cada driver puede manejar
un máximo de 32 lámparas.
WC6 LAMP
Publicidad
Tabla de contenido
