Wagan Tech Brife-Nite 5W LED Manual De Usuario página 3

AC charging:
1. This power unit is intended to be correctly orientated in a vertical or floor
mount position.
2. Plug one end of the AC adaptor into the wall and insert the DC end into the
Charging Jack on the lamp
3. Plug the wall module into an AC outlet
4. The red Charging LED will light up to indicate the lamp is charging
Vehicle DC charging:
1. With DC/DC charge/operate adaptor: Insert the DC plug into the DC jack
on the lamp
2. Plug the larger DC plug into the cigarette lighter outlet
3. The red Charging LED will light up to indicate the lamp is charging
WARNINg
• Do not shine directly into eyes.
• To reduce the risk of electric shock, unplug the unit and allow to cool before
attempting any cleaning
• Though weather resistant, do not submerge the unit in any liquid
IMPORTANT
Never leave the battery discharged. Recharge immediately after discharging.
Recharge fully every 3 months even though the unit is not in use. This will prolong
the life of the battery.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
User's Manual—Read before using this equipment
©2012 Wagan Corporation. All Rights Reserved.
3