Publicidad
Idiomas disponibles
Idiomas disponibles
Genius Car Alarm
Genius Car Alarms
Function 4 – lights Indicator - Armed and Disarmed
Arm and disarm with lights Indication
Function 5 – Arm and disarm with sound
The siren sounds when arms and disarmed
Function 6 – Warning of door opened on driven
With the ignition key in the ON position and a door is opened, the vehicle's lights began to turn on
and off by giving notice to alert the driver and the drivers of nearby vehicles.
Function 7 – Function Panic
In Arm mode, press the button of closed padlock, 2 times in 3 seconds, the siren sounds, lights
blink, 30 seconds
Function 8 – Sounds of Armed
It will be possible to select that of 1 light blink and 1 siren sound, or 2 lights blink and 2 siren
sounds on Armed
Function 9 - Sound of Disarmed
It will be possible to select that of 1 light blink and 1 siren sound or 2 lights blink and 2 siren sounds
on Disarm
Function 10 –Automatic Arm
The alarm system automatically arms itself after closing the last door and the ignition in OFF.
Once the last door is closed, the lights will 1 flash, the siren will sound and the LED on board starts
flashing quickly indicating the onset of armed Auto mode, after 30 seconds after closing the last
door, the siren will sound and one board LED will start flashing slowly to confirm full arming of the
alarm system.
If during the first 30 seconds before arming the alarm system is a door open, the automatic arming
Standby pass, closing the door and starts again restarts the timeout 30 seconds. The automatic
arming does not work in valet mode.
Note: To avoid problems when leaving the vehicle, be sure to remove the key from the ignition
switch because the alarm system to arm automatically locks could close avoiding you to re-enter
the vehicle.
Function 11 – Lock door with the Armed Automatic
Function 10 in ON and Function 11 in ON, automatic armed with lock door.
Function 12 – Anti Hijack by Doors
Every time a door is opened and closed with the engine running, the anti-hijack activates.
Function 13 – Anti-Hijack by Ignition
The anti-hijack is immediately activated whenever the ignition key is passed from the OFF position
to the ON position.
Function 14 – Factory Reset.
This function was created to place all the functions of the memory of the alarm to the state as it
was coming from factory.
www.alarmasgenius.com
7
20
www.geniuscaralarm.com
Publicidad
