Memory Function; Bucket Full Light - Gree GDN10AY-K5EBA1A Manual Del Propietário

ease humidity. The display range of humidity is 35%~80%. Each pressing
will increase/decrease humidity by 5%.
● Continuous Dehumidify Setting: To set the unit for continuous operation,
press the - button until the screen reads CO.
Shows the set % humidity level while setting, then shows the actual
(± 5% accuracy) room % humidity level.
4
FILTER Button
been operating for 250 hours, Filter Cleaning Indicator will be lit up to remind
Other Instructions
1. Alarm Warning
If bucket is full or not locked into place for over 3min, buzzer will go off for 10s
to remind you to empty bucket or put it back into the correct place.
2. Auto Stop
When bucket is full, removed or not placed correctly or the humidity is 5%lower
than the set humidity, unit will automatically stop.

3. Memory Function

If power is lost, all of the control settings are remembered. So when power is
restored, the unit will start back up in the settings it was in when power was
lost.

4. Bucket full light

This indicates that bucket is full or removed or not placed correctly.
5. Clean the Filter On indicator light
7