Important Safety Instructions; General Informations - FSC metro makro GDF3004GDF3008 Manual De Instrucciones

ELECTRIC DEEP FRYER
t
GDF3004
GDF3008
GDF5008
GB
Please take a few minutes before starting operation
of the appliance and read the following operating
instructions.
QA13-0000002871
QA13-0000002874
QA13-0000004080
QA13-0000004081
QA13-0000002872
QA13-0000002873
1. General informations
Information about these operating instructions:
1. These operating instructions describe the
installation, operation and maintenance of
the device and are an important source of
information as well as a reference.
2. Knowledge of all the safety guidelines and
handling instructions is a pre-condition for safe
and proper work with the device.
3. Furthermore the applicable local accident
prevention regulations and the general safety
conditions for the area of application are to be
observed.
4. The operating instructions are a component
part of the product and are to be stored in the
immediate vicinity of the device so that they are
accessible at all times for installation, operation,
maintenance and cleaning personnel.
Explanation of symbols:
Important safety and technical guidelines for this
device are marked in these operating instructions
with symbols. The guidelines must be observed
in order to avoid accidents, personal and material
damage.
WARNING! Cautionary
advice to avoid damaging
the appliance or causing
personal injury. Important
safety or operation
instructions.
GDF3024
GDF3028
GDF5028
- 11 -
WARNING! Danger of
electric shock!
NOTE! Extra information or
additional instructions.
TIP! Additional introduction
for better operation.
Equipotentiality. It is for the
connection of an external
equipotential conductor.
2. Important safety instructions
CAUTION: Read the instructions
before using the machine.
1. This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge.
2. If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
3. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.