Receiver Operation - Mark MW 900/1 Manual De Uso

RECEIVER OPERATION:

1.Power the receiver
Connect the DC power to the rear DC input jack.
Open the battery compartment of the receiver,put four AA
batteries (note the polarity)
2. Turn ON the receiver
When Turn on the receiver, all buttons are locked, long press the"SET" button 3 seconds to
to unlock.
3.Pre-setted channels setting
Press the SET button to get into this mode. Press the Up or Down
buttons, the channels jumps forwards or backwards between ch1-ch16.
4. Free frequencies setting
Press the SET button to get into this mode. Press the Up or Down
buttons, the frequency jumps forwards or backwards 0.05MHz
Locked
4
User Manual/Manual de Uso
EN
MW 900/1 - /2