Side View - KlipXtreme Ridesmart KMA-610 Manual De Instrucciones

Side view

5
4
1. Adjustable side arms
2. Touch button (both sides)
3. Type-C charging port
4. Charging head angle with pivot knob
5. Vent clip
1
2
3
III. How to use your wireless charging mount
1. First, connect the USB end of the Type-C supplied cable into the
device and the other end on the available USB power source. To
enable fast wireless charging, it will require a QC2.0/QC3.0 USB
power source.
2. The LED indicator light will alternatively flash green and then blue.
It will remain solid green as soon as the device is connected.
3. Touch the button located on the right or left side of the platform
to open both adjustable arms and place the phone on the charger.
The arms will lock automatically once the phone is placed on the
charger and it will start charging immediately. The LED indicator
will change to blue once it starts charging.
4. If the phone is not charging, adjust the foot up or down until it
starts wirelessly charging.
5. When the device is in Standby mode, the LED indicator lights up
in green.
6. Press the button again to unlock the arms and take the phone out.
Note: The LED indicator light will start flashing and the device will stop
charging if the current amount is too large or if there is a foreign object in the
platform. Do not wireless charge the phone if a similar situation happens.