Publicidad
Idiomas disponibles
Idiomas disponibles
STEP-BY-STEP ASSEMBLY:
STEP 5:
Begin by installing all of the screws along one edge of the back panel. Next, using
5
a square or tape measure, make sure that the case is square. (if using a tape measure, the
distance from one corner, diagonally to the other corner should be the same in both direc-
tions.) Install the remaining screws, starting with the corners.
STEP 6:
Insert shelf supports into desired holes. Different holes accommodate different
6
shelf heights. Angle shelves to fit between the rails and set on top of shelf supports.
hole for anti-tip
strap
finished edge
8/11
Publicidad
