ImageLab FS9T Manual De Usuarios página 13

USING YOUR SCANNER
Scanning Your First Negative
1. Open the Negative Tray
The Negative Tray has 5 openings for Negatives. Place negative strip so that
each frame is centered in the openings, and the space between frames are
lined up with the dividing spacers on the tray. Do not flip/reverse your
negatives or your scan will be scanned backwards.
2. Close the Negative Tray
Make sure that the Negatives are centered in the tray openings.
3. Slide the 4-way switch to SCAN
The LCD screen will turn on. When the scanner is ready, the screen will show
the word "scan", a yellow frame, a battery icon in the upper right corner, and
an image counter & memory card icon on the bottom of the screen. The
counter shows the remaining number of scans you can make before running
out of internal memory or the memory on your SD card if inserted.
4. Insert the Negative Tray into the Tray Slot
Insert the Negative Tray into the scanner, from right to left, with the slide in the
tray facing right side up and facing you.
5. Move your Slide Tray into Position
Gently push the tray right to left. You will feel the tray stop/click as the slide
tray positions itself for scanning. When you see your slide in the LCD, center
your slide inside the yellow frame by moving it slightly to the right or left until
you are satisfied. The scanner will scan what is inside the yellow frame.
6. Press the NEGATIVE Button
When you press the NEGATIVE button, the scanner will scan the negative and
you will see your scan for a moment on the LCD. When the LCD goes back to
a live preview you are ready to scan your next negative.
12