Indication; Instructions For Use; Assembly Of The Aston Hearing Amplifier; Starting The Aston Assistive Hearing Amplifier - VISIOMED ASTON VM-AS10 Manual De Usuario

3. INDICATION

Correction of mild to moderate age-related hearing loss (presbycusis). It is
not a hearing aid. This hearing amplifier amplifies surrounding sounds and
removes some of the background noise. It allows hearing-impaired people
to compensate for their hearing loss.

4. INSTRUCTIONS FOR USE

A. ASSEMBLY OF THE ASTON HEARING AMPLIFIER
1. Select the tube corresponding to the ear (right or left) on which the ASTON
Hearing amplifier must be worn.
The tube with the red mark 2B corresponds to the right ear. The tube with
the blue mark 2B corresponds to the left ear.
2. Select the ear tip best suited to your ear.
Note: It is advisable to start with the larger ear tips. If it does not fit properly into
your ear canal, replace it with a smaller size.
3. Insert the end of the tube into the hole in the centre of the ear tip and exert
a slight pressure.
24 ASTON - Manuel 082017
4. Connect the hearing amplifier and the triangular base of the tube by
holding them at each end. Do not twist the tube during this operation.
B. STARTING THE ASTON ASSISTIVE HEARING AMPLIFIER
1. Peel off the tab on the flat side of the battery.
2. Carefully open the battery compartment and insert the battery.
Caution: Handle the battery compartment carefully. A polarity error prevents
closing of the device. Do not force closure.
3. The hearing amplifier is on and ready for use.
Note: For optimal use, we recommend putting the hearing amplifier in its case
with the battery compartment open when not in use.
ASTON - Manuel 082017 25