Homak security FIRST WATCH HS10131310 Guía De Utilización Y Directivas De Funcionamiento página 3

To Program The First Personal User Code:
1. Press the red programming button that is located on the inside
of the safe, on the right side of the locking
mechanism.
2. The orange light should be on.
3. Enter any personal user code from 1-8 digits in length.
4. For higher security, Homak reccomends a code of at least 5
digits in length.
5. After personal user code has been entered press "*" or "#" to
confi rm the code.
6. The orange light should fl ash 2 times confi rming that the code
has been accepted.
7. Use caution when programming a personal user code. It is rec-
ommended to "test" your code while the safe is still open to ensure
the code has been properly entered.
8. When the valid code is entered, the lock will beep twice and the
green LED light will turn on.
9. If the code has been entered incorrectly, repeat steps 1 – 6.
To Program The Second Personal User Code:
1. Press "0" twice, then press the red programming button
2. The orange light should be on.
3. After personal user code has been entered press "*" or "#" to
confi rm the code.
4. The orange light should fl ash 2 times confi rming that the code
has been accepted.
5. Use caution when programming a personal user code. It is rec-
ommended to "test" your code while the safe is still open to ensure
the code has been properly entered.
6. When the valid code is entered, the lock will beep twice and the
green LED light will turn on.
7. If the code has been entered incorrectly, repeat steps 1 – 3.
How To Open The Safe:
1. Enter your personal user code.
2. Press either "*" or "#" to confi rm the code.
3. The light will turn green.
4. Turn knob counter clockwise and the safe will open.
- 3 -