Human Touch Perfect Chair pc600 Manual De Uso Y Cuidado página 4

get ready
UNPACK THE BOXES
Head pad
Body pad with 3D
EasePoint Technology,
Jade Heat and Memory
Head pillow
Foam PLUS
Arm cap (2)
Phillips-head
screwdriver
Screw (6)
INSTALL THE POWER HUB.
1. Gently turn the chair onto its left-hand side (Fig.1).
2. Locate the four screw holes on the bottom of the front cross bar (Fig.2).
Front cross bar
Fig.1
humantouch.com
PARTS BOX
Jade heat panel
Power hub
Connector box
Screw / Washer
Transformer
Front cross bar
Fig.2
4
Your PC-LiVE pad set requires some assembly. Just follow a few simple steps to
install the Jade Heat System power and controls then attach the pads to the chair.
Before you know it you'll be settled into soothing comfort.
3. Using a Phillips-head screwdriver, secure the power hub to the chair with the cord facing upward,
using the four provided screws (Fig.3).
4. Leaving approximately two feet of the chair power cord, coil the excess cord neatly (Fig.4).
5. Open the pocket on the bottom of the chair canvas, then tuck the coiled cord into the lower pocket (Fig.4).
Power hub
Fig.3
6. Plug the chair power cord into the power hub (Fig.5).
7. Plug the transformer into the power hub outlet (Fig.5).
8. Feed the transformer plug up through the hole in the chair canvas (Fig.6).
9. Gently return the chair to the upright position.
Chair power cord
Transformer
Transformer plug
Fig.5
SLIDE THE BODY PAD ONTO THE CHAIR FRAME.
Slide the body pad onto the lower part of the chair frame, making
sure that the frame slides into the fabric pocket located on the
bottom side of the pad. Fold the upper part of the pad forward
onto the seat.
Coiled
power cord
Fig.4
Transformer plug
Fig.6
5 5