Panorama Antennas SW3-665 Guia De Instalacion página 7

1 - To Wall Mount this antenna you will need:
1 x Antenna
4 x Washers
2 - Fix the mounting bracket to the external wall or other flat surface using suitable
screws and wall plugs (not supplied).
3 - Fix the mounting bracket to the antenna using the washers and screws supplied.
4 - Fix the antenna to the wall mounting bracket
5 - Secure the antenna in place and waterproof the exposed connections. Fully tighten
the mounting hardware. If exposed the RF connector joint should be waterproofed with
a weatherproof electrical tape (self amalgamating type is recommended) allowing a
significant overlap of each turn and ensuring that the overlap is in the opposite direction
to predicted water fall.
2 x Wall Bracket Plates
4 x Spring Washers
4 x Screws
2 x Nuts
EN