PEERLESS Paramount PSP2 Instalación Y Montaje página 3

Remove Mounting Plate
Satellite speakers may require either the single
1
hole mounting plate (B) or the double hole
mounting plate (A). Remove mounting plates
(if attached) from arm (C or D) by disengaging
the hex set screws a few turns using the allen
wrench (P). Pull mounting plates (A or B) from
arm.
NOTE: Speaker mounts may come
preassembled in diff erent confi gurations.
Installing Mounting Plate to Speaker
2
Single hole threaded insert mounting
Confi rm the hole size on back of speaker can use either of the following screws: 8-32 x 5/8" screw (F), M5 x 20 mm
phillips screw (E), 1/4-20 x 7/8" phillips screw (G) or M4 x 8 mm fl at head phillips screw (H).
For attachment to speakers with M5 threaded insert:
Attach single hole mounting plate (B) to back of speaker
using M5 x 20 mm screw (E) and washer (Q) as shown.
SPEAKER
For attachment to speakers with 8-32 threaded insert:
Attach single hole mounting plate (B) to back of speaker
using 8-32 x 5/8" phillips screw (F) and washer (Q) as
shown.
SPEAKER
Visit the Peerless Web Site at www.peerlessmounts.com
If M5 x 20 mm screw does
not fully secure mounting
plate to speaker, spacer (I)
can be used.
B
E
Q
If 8-32 x 5/8" screw does
not fully secure mounting
plate to speaker, spacer (I)
can be used.
B
F
Q
A
SET
SCREW
For attachment to speakers with M4 threaded insert:
Attach single hole mounting plate (B) to back of speaker
using M4 x 8 mm fl at head phillips screw (H) and washer
(Q) through the off -center hole on mounting plate as
shown.
I
For attachment to speakers with 1/4"-20 threaded
insert:
Attach single hole mounting plate (B) to back of speaker
using 1/4-20 x 7/8" phillips screw (G) and washer (Q) as
shown.
I
3 of 18
For customer care call 1-800-729-0307 or 708-865-8870.
B
SET
SCREW
C or D
SPEAKER
SPEAKER
B
ISSUED:10-23-07 SHEET #: 087-9016-4 02-12-18
B
H
Q
G
Q