Publicidad
Idiomas disponibles
Idiomas disponibles
•
To remove the accessory, loosen the bit holder by turning it to the left (anti-clockwise) as seen from the front
•
Check that the battery is correctly installed
•
Make sure you select the correct spin direction (8).
GEAR SELECTOR
•
The cordless driver drill has two gears; a short one and another long one
•
To change gear, move the selector to the desired position (9).
SWITCH
•
When pressed, the bit will turn
•
The spin speed may be controlled by varying pressure on the trigger
•
lf pressed gently, the bit will turn slowly, increasing with the pressure applied.
BELT CLIP
•
With the belt clip the cordless driver drill can be hung anta a belt (10)
•
The user has both hands free and the cordless driver drill is always at hand.
Publicidad
