MAX LIGHT Plasma Ball Manual De Instrucciones página 2

ENGLISH
Congratulations to the purchase of this Max product. Please read this manual thoroughly prior to using the product in order to
benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
For your own safety and to extend the life of the product, please follow these important guidelines:
▪
For indoor use only. Only use the 220-240VAC, 50Hz only power supply.
▪
Keep out of reach of children and pets.
▪
Do not place the product on surfaces that are unstable or subject to vibration.
▪
Do not open the base of product. Do not attempt to remove glass sphere.
▪
Do not use in the bathroom or expose the unit to moisture. Do not immerse in water. Do not pull the plug out from the
power outlet with wet hands. Do not handle the globe with wet hands. If water or any other liquid is spilled on the
plasma globe, switch it off immediately.
▪
Do not expose the plasma ball to high temperatures, high humidity, or direct sunlight. Keep the globe in a well-
ventilated area and do not leave it on for extended periods of time.
▪
Do not expose the plasma ball to dust, smoke or steam.
▪
Keep away from metal surfaces. Do not touch the glass with metal objects. Remove any rings or other metallic
jewellery from your hands before handling. Touching the globe with a metal object can cause an electrical arc to form
at the glass surface, which can lead to small skin burns and potentially a fire hazard.
▪
Do not touch any grounded metal while your hand is on the energized plasma ball. If you do, you will get a vey startling
and unpleasant shock of static electricity.
▪
Before cleaning, turn the selector switch off and disconnect the transformer. Clean the unit with a soft cloth. Do not
use solvents or other chemicals, and abrasive cleaners to clean the product.
▪
If the unit is dropped, causing obvious damage, or is functioning in abnormal manner, producing unusual sounds or
smell, or becomes too hot, unplug and discontinue use immediately. Do not attempt to repair it yourself.
▪
The glass ball is very fragile. Switch off when not in use and store away safely to avoid the glass from being exposed
to potential breakage hazards.
▪
If you have more than one plasma globe, keep them at a safe distance of at least 3 feet from each other.
▪
USB cable devices should not be operated near an energized plasma ball. Touching an energized plasma globe and a
USB cable at the same time may cause damage to the device connected to the USB cable.
▪
If the external flexible cable or cord of this fitting is damaged, it shall be exclusively replaced by the manufacturer or a
suitably qualified person, in order to avoid a hazard.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Max cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
2