Vivanco CHH 8000 Instrucciones De Uso página 2

A
1 2
8 9
B
1 2 3 4 5 6
3
All manuals and user guides at all-guides.com
CHH 8000
3 4 5 6 7
PARING
DIGITAL IN
ANALOG IN
HIGH
GAIN
LOW
DC IN
9V
10 11
7 8
Pairing
L R
4
GB
CHH 8000
Congratulations on purchasing your new Vivanco product. This cordless headphone system
with the latest transmission technology and the Vivanco CSI – Convenient Sound
Intelligence technology for a great music experience.
What does CSI – Convenient Sound Intelligence mean?
The cordless headphones CHH 8000 from Vivanco unify innovative CSI technology and
appealing design.
The cordless digital signal transmission (Toslink) guarantees a noise-free, crystal-clear
sound and true-to-detail sound reproduction for Hifi and TV.
One particularly convenient feature is the simultaneous use of 2 sound sources (digital
and analogue) through easy toggling directly on the headphones (remote function). The
CSI technology also focuses on an unrestrictedly private sphere. "Total Privacy"
completely eliminates the possibility of third parties listening in.
And – extra soft comfort pads that enclose the ears and an adjustable head band ensure
many hours of listening pleasure.
Enjoy your favourite music or your favourite films without irritating cables in the highest
stereo quality or even in full digital quality.
A Transmitter
1 Charging indicator light
2 Operation indicator light
3 Pairing button
4 Digital input (Toslink)
5 Analogue stereo output
6 Gain switch
7 Power supply socket
8 Power supply
9 Cinch adapter
10 Audio connecting cable
11 Stereo jack adapter 3.5 mm to 6.35 mm
B RF headphone
1 Charging contacts
2 Earshell with battery compartment
3 On/off switch (ON/OFF)
4 Volume control (VOLUME)
5 Operation indicator light
6 Digital/Analogue toggle switch (D/A)
7 Battery compartment
8 Pairing button (PAIRING)
Important information
Please read these operating instructions carefully and keep them in a safe place.
Do not use the devices in water or rain.
The AC adaptors are designed for these devices only. Do not use the supplied AC
adaptors with other devices.
Avoid exposure to extreme heat or strong light.
Do not open the housings or the AC adaptors (danger of electric shock!).
Check whether the local mains voltage corresponds to the voltage indicated on the
AC adaptor.
Avoid touching the battery or charging contacts. Do not touch the contacts with
metal objects.
Do not cover the devices (e.g. with a towel, sheet, etc.)
GB
Clean the devices using a moist cloth and never use aggressive cleaning agents.
Constant use at high volumes impairs your hearing and may cause permanent damage
Do not dispose of this product with the domestic waste; take it to your local
electronic waste recycling depot.
To completely isolate the device from the mains supply, the plug-in power supply
must be pulled out of the mains outlet. Therefore, the device must be placed in such
a way that unhindered access to the mains outlet is always ensured, so that the
plug-in power supply can be immediately pulled out in an emergency. To eliminate
the danger of fire, the plug-in power supply must be pulled from the mains outlet
whenever the appliance is not to be used for a prolonged period, such as when you
go on holiday. The appliance must not be subjected to any splashed or dripping
water; also, objects filled with liquids, like vases, or open beverages should not be
placed on or near the appliance
Protect the environment and keep your energy consumption down – if you are not
using the appliance for a prolonged time, pull the mains plug. The environment will
be grateful!
Preparing your RF headphone
1. Place the transmitter near to your hi-fi system, your TV or another audio source.
2. Connect the power supply to the power supply port of the transmitter and then inser
the plug into a power outlet.
3. Connect the audio connecting cable to a headphone output, or to a line out or rec.
out output. Set the volume of your audio source to 1/4 to 1/3 of the maximum
volume and connect the other end of the cable to your transmitter.
4. Connect the digital output (Toslink) of your DVD player or any other digital audio
source to the digital input of the transmitter. Use a suitable Toslink cable for this
purpose (not part of supplied kit).
5. The operation indicator light of the transmitter glows blue when music is received.
6. Insert the supplied batteries as described in the chapter "Using batteries or
rechargeable batteries".
7. Switch on the cordless headphone with the on/off switch.
Take a thin, blunt object (e.g. paper clip). Press with it carefully on the pairing button
on the transmitter.
Then also press within 10 seconds on the pairing button on the headphone.