Overheat Safety Feature - Comfort Glow EMF160 Instrucciones De Instalación Y El Manual De Propietario

OVERHEAT SAFETY FEATURE:

This heater is equipped with an automatic overheat protection device. If the heater grill is obstructed, or if the heater
gets too hot for any reason, the automatic overheat device will turn the heater off. To reset the heater, simply turn off
the power and unplug the heater remove any obstructions, leave unplugged for 10 minutes until it cools completely.
INSTRUCTIONS FOR POWER
This heater is for use on 120 volts only. The cord has a plug as shown in the following figure.
WARNING: Before servicing this heater be sure to unplug heater from wall outlet. Do not only turn off heater from
the main "ON/OFF" switch, be sure to unplug this heater.
PRE-OPERATING INSTRUCTIONS
1. Carefully remove your heater from box. (Please SAVE the Box for off season storage.)
2. Make sure the heater is switched OFF before plugging the heater into the outlet. Connect to properly grounded
outlets only. Note: The power cord has a polarized plug (with one blade wider than the other) that will only fit
in a polarized outlet one way. If it does not insert easily try reversing the plug. If it still does not fit contact your
electrician to replace your outlet. DO NOT defeat the safety purpose of the polarized plug.
3. Place heater only on a firm level surface, free from obstructions and at least 3 ft. away from any wall or other
objects such as curtains, plants, etc.
4. Avoid overloading your circuit by not using other high wattage appliances in the same outlet.
~ 3 ~