Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Lights
Description
Indicators
BL HY21W 12V yellow
3
Number plate light
BL C5W 12V (35 mm long)
white
3
Rear fog-light
in
left tail light
BL PR21W 12V red
3
Reversing light
for
right tail light
BL PR21W 12V white
3
brake / tail light
BL P21/5W 12V white
3. Bulb is commercially available.
Adjusting lighting
When the bicycle rack (1) is delivered, the tail lights (9) are in the
transport position.
Before using the bicycle rack (1), the tail lights (9) need to be
attached in the correct position.
1
9
1. Undo the knurled wheel (26) and push the tail lights (9) into the
outer position.
2. Tighten the knurled wheel (26) again and check that the tail
lights (9) are firmly fastened.
Replacement
item no.
see no. 32,
E1640
Page 15
see no. 33,
Page 15
see no. 34,
Page 15
see no. 34,
Page 15
see no. 35,
Page 15
26
9
M+P-25A-0145
Folding out / collapsing the bicycle rack
Folding out the bicycle rack
--
--
--
--
6
1. Open the quick release clamp (6) to approx a 90° position.
2. Fold up the rack frame (7) and fully close the quick release
clamp (6) so that the rack frame (7) is fixed.
Attention
The registration number on the bicycle rack must match the
registration number of the vehicle and be clearly legible.
12
3. Press the holder (13) down. Insert the number plate in the
number plate holder (12), push upwards and insert fully.
4. Release holder (13) and check the number plate sits securely.
Note
To insert taller number plates, press the stoppers (14) back and
push the number plate fully into the number plate holder (12).
The drilling points (15) must be used for fixing smaller number
plates.
- 10 -
6
90°
14
15
7
6
M+P-25A-0135
13
M+P-25A-0136
Publicidad
Tabla de contenido
