STEP 5
Connect counter wires in 2 locations as shown. Install wire protection covers to cover wire connections.
ADJUSTING THE SEAT
The Seat on your equipment can be adjusted to target different areas of your abdominal muscle. The Seat
adjustment pin is located at the rear of the Seat below the cushion.
There are 4 Seat settings: Front, Left, Right and Free-Style Motion.
To lock the Seat into the Front, Right or Left settings, pull down the pin and move the Seat to the desired setting
(Front, Right or Left). Release the pin and adjust the Seat until the pin "pops" into the hole
underneath the Seat at the desired setting. Make sure the pin is in the "locked" position and the Seat is secure
before you use the equipment.
To adjust the Seat for the Free-Style Motion setting, pull down the pin and twist the pin to the "unlocked" setting.
Rotate the Seat by hand to ensure that it is moving freely.
Unlocked position is for Free-Style Motion
6