Descargar Imprimir esta página

Din Radio Provision With Pocket - Metra Lariat Instrucciones De Instalación

Ford f-150 2009-2010

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
2. Slide the included brackets onto
the sides of the radio housings
pocket from the back of the
housing forward. (Figure B)
3. Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure C)
4. Slide the aftermarket head unit into
the cage and secure. (Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-5822

DIN radio provision with pocket

CUT HERE -TOP LEG ONLY
CUT
(Figure A)
(Figure C)
CUT HERE -TOP LEG ONLY
CUT
(Figure B)
(Figure D)
4

Publicidad

loading