Assembly Instructions - Pleasant Hearth OFG214BT Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Make sure the gas control knob is Off ("O" on the knob).
Insert the gas cylinder into the opening in the bottom of
body (B). Connect the gas cylinder (not included) to the
appliance regulator by turning the tank clockwise by
hand until tight.
Perform leak test in a well ventilated area outside and
where no source of spark can occur. Apply a 50/50 soap
and water solution with a brush or spray bottle to check
all the connections before attempting to light the
appliance. The formation of bubbles indicate that there
is a leak. If a leak is found or you smell gas, disconnect
cylinder, and do not use the appliance until repairs can
be made.
NEVER USE A LIGHTER/FLAME TO CHECK FOR
GAS LEAKS.
2. Place the lava rocks (A) in the top of the body (B)
in an even layer over the burner.
DANGER
1
2
A
6
B
B
CC
DD