Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Tail light
For installing the tail light on a seat support, for example, proceed as follows:
•
The upper housing surface should be parallel to the ground and to the
longitudinal axis.
•
The installation height of the tail light should be at least 250 mm and a
maximum of 1200 mm above the ground.
1.
Clip the rubber pad suitable for your cycle frame to the back of the rear
light. Before clipping it on the rear light, test and see which rubber pad is
more suitable.
2.
For assembling, fix the bracket of the tail light to the seat support using the
rubber (2).
Make sure that the tail light is fixed firmly and mounted correctly before you start
using the bicycle.
English
2
11
Publicidad
