Glass Cleaning; Maintenance Frequency - Faber e-MatriX 800/500 I Guia De Inicio Rapido

E N G Q u i c k r e f e r e n c e e - M a t r i X
1. Dear user
For safety instructions, installation and first use read the manual.
2. Using the fire
Remote control (see fig. 1.0)
1 = OFF
2 = press once for ON / press twice for
glow effect only
3 = reduce flame
4 = increase flame
5 = reduce fire crackling sound
6 = increase fire crackling sound
3.

Glass cleaning

!! Switch off the appliance before cleaning the glass.
Depending on the water quality and time of use staining will occur on the glass.
4. Removing glass
4.1 Front glass (e-MatriX front glass only)
• Remove the cover strip see fig. 2.0a.
• Rotate the glass clamp clockwise see fig. 2.0b.
• Place suction cups and remove the front glass see fig. 2.0c.
4.2 Front glass (e-MatriX 2 or 3 sided glass)
• Rotate the glass clamp clockwise see fig. 2.1a and 2.1b.
• Place suction cups and remove the front glass see fig. 2.1c.
For replacing the front glass repeat the steps in reverse order.
4.3 Side glass
For cleaning only it's not necessary to remove the side glass.
5.

Maintenance frequency

• For commercial use once every three months.
• For domestic use once a year.
For further information see manual.
Manual control (behind access door)
See fig 1.1
A = main switch
1 = ON/OF
2 = pairing
3 = only for maintenance (service engineer)
4 = reduce flame
5 = increase flame
6 = reduce fire crackling sound
7 = increase fire crackling sound
5