Publicidad
ENFORCER Pushbutton Request-to-Exit Plates
Models:
Please read the manual carefully before beginning installation.
The ENFORCER Weather-Resistant Mushroom-Cap RTE Plates are ideal for many outdoor access
situations, with a 1
/
" (38mm) diameter mushroom-cap (green or red), single-gang faceplate and NO/NC
1
2
contact rated 50A@24VAC.
SD-7201GC-PEQ
"Push to Exit" brushed stainless steel
faceplate
SPDT
SD-7217GWQ
Same as SD-7201GC-PEQ except:
White plastic blank faceplate
Specifications:
Model
Operating voltage
Current rating
Faceplate
Operating
temperature
IP rating
Built-in timer
Dimensions
Weight
Parts List:
1x Request-to-exit plate
Wiring the RTE Button:
1. Run two wires from a device (such as an alarm or an access control
system which can unlock an electronically-controlled lock) through the
wall to a single-gang back-box as follows:
a. One wire from either the NO or NC terminal
b. One wire from the COM terminal
2. Connect to the RTE terminals as shown in Fig. 1.
3. Use silicone sealant where the faceplate meets the back box and
around the mounting screws to ensure a weather-proof installation.
Screw plate to the back box, using caution not to pinch any wires.
*SD-7201GFPE1Q has 2x N.O. and 2x N.C. connectors.
IMPORTANT
Users and installers of this product are responsible for ensuring that the installation and
configuration of this product complies with all national, state, and local laws and codes related to
locking and egress devices. SECO-LARM will not be held responsible for the use of this product
2
SD-7201GCPE1Q
Same as SD-7201GC-PEQ except:
"Exit" and "Salida" faceplate
SD-7201RCPE1Q
Same as SD-7201GC-PEQ except:
"Exit" and "Salida" faceplate
Red button
SD-7201GC-PEQ
SD-7201GFPE1Q
N/A
50A@24VAC
No
3.7-oz (105g)
2x Wall-plate screws
SD-7201GCPE1Q
SD-7201RCPE1Q
Brushed stainless
-40°~167° F (-40°~75° C)
IP65
4
/
"x2
/
"x2
/
" (114x70x70 mm)
1
3
3
2
4
4
2.2-oz (62g)
1x Installation manual
SD-7201GFPE1Q
Same as SD-7201GC-PEQ except:
"Exit" and "Salida" faceplate
DPDT
SD-7201GAPT1Q
Same as SD-7201GC-PEQ except:
"Exit" and "Salida" faceplate
Timer (1~180s) and buzzer output
NO/NC contact rated 3A@24VDC
SD-7201GAPT1Q
12 or 24VDC
3A@24VDC
Yes
4.7-oz (133g)
Fig. 1*
N.O
COM
SECO-LARM U.S.A., Inc.
SD-7217GWQ
N/A
50A@24VAC
White plastic
No
5.1-oz (144g)
N.C.
COM
Publicidad
