Getting Started - Thompson WHP-6005BT Instrucciones De Uso

G Operating instruction
Controls and Displays
1. Multifunction button
2. Louder/quieter, skip ahead/back one track
3. LED
4. Micro USB socket
5. Microphone
Thank you for choosing a Thomson product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package Contents
• 1 Bluetooth headset
• 1 USB charging cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and overheat-
ing, and only use it in a dry environment.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
given in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Since the battery is integrated and cannot be removed,
you will need to dispose of the product as a whole. Do
this in compliance with the legal requirements.
2
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
Warning – Rechargeable battery
• Only use suitable charging devices or USB
connections to charge the product.
• As a rule, do not use charging devices or USB
connections that are defective and do not try to
repair them yourself.
• Do not overcharge the product or allow the battery
to completely discharge.
• Avoid storing, charging or using batteries in
extreme temperatures.
• When stored over a long period of time, batteries
should be charged regularly (at least every three
months).
Warning - High volumes
• Using this product limits your perception of
ambient noise. For this reason, do not operate any
vehicles or machines while using this product.
• Always keep the volume at a
reasonable level. Loud volumes,
even over short periods, can
cause hearing loss.

4. Getting Started

• The headset is equipped with a rechargeable battery.
The battery must be fully charged before using the
device for the first time.
• Ensure that the headset is switched off before charging it.
• Begin charging the power pack by connecting the
included USB charging cable to the charging terminal
(4) as well as to the USB connection of a PC/laptop.
• Alternatively, you can charge the headset using a
suitable USB charger. Please refer to the operating
instructions for the USB charger used.
• The indicator light remains steadily lit in white during
the charging process.
• It takes around 4 hours until the battery is completely
charged.