Connection Diagram Of Tr-Nc/8V For Key Phasor; Analog Input 0-10V - CEMB TR-NC/8 Manual Del Usuario

4.5

Connection diagram of TR-NC/8V for Key Phasor

Analog Input 0-10V

Here below the signal generateci by the key phasor that shall be read by 0-10V analog input port at DCS.
The analog input port should be programmed to be triggered at a Voltage compatible with gap and
key depth
10
warning: ifa protruding tooth is used inste-
ad of an inset key, be careful to calculate
the gap on top of the tooth