MetalTech I-CISO4 Instrucciones De Operacion Y Ensamble página 3

ASSEMBLY INSTRUCTIONS
Erect the scaffold (one or two frames high) by following the manufacturer instructions.
1
Install caster into outrigger and secure it with lock pin. Set caster brake. Repeat with the other casters.
2
Place outrigger to end scaffold frame at a 90° angle to the side brace.
3
Lock outrigger into place by using two locking pins. If you use scaffolding with casters, you must
4
first remove the locking pin of the caster to attach the outrigger and then replace the locking pin
to lock the caster and base of the outrigger.
5 Firmly tighten the tightening knob so that the scaffolding and the outrigger are perfectly
lined up and united.
BOX CONTENTS
QTY. PART CODE
4 321116000 Outriggers
4 321108100 Tightening knobs
4 321105100 Casters
12 321103700 Locking pins
1
DESCRIPTION
2
5
4
3
ENGLISH
3